" />

BDCOM GP3600-08(2AC)

BDCOM GP3600-08(2AC)
BDCOM GP3600-08(2AC)
BDCOM GP3600-08(2AC)
Kodas 510940
GPON OLT stotis. L2/L3 valdomas komutatorius.  8xPON linijos, 8xGE. 4x10GE, 19"x1U. 2 x 230VAC maitininimas.
  • GPON OLT stotis;
  • L2/L3 valdomas komutatorius;
  • 8xPON linijos, 8xGE, 4x10GE;
  • Palaikoma iki 1024 abonentų
  • 19" x 1U. Dvigubas 230VAC maitininimas.
Attributes GP3600-08
System Capacity

Maximum coupling ratio:1:128
Backplane bandwidth:205G
MAC table capacity: 64K

PON Interfaces

8

Uplink interfaces

4 x gigabit SFP slots, 4 x gigabit TX/SFP combo ports

4 x 10G SFP+ slots

Attributes of the PON Interface

The transmission rate with downlink 2.5Gbps/uplink 1.25Gbps
Class B+ and Class C+ GPON module
Security: ONU authentication mechanism

Standards

ITU-T G.984/G.988
IEEE 802.1D, Spanning Tree
IEEE 802.1Q, VLAN
IEEE 802.1w, RSTP
IEEE 802.3ad physical link static/dynamic aggregation (LACP)
Ethernet – II

QoS

Backpressure flow control (half duplex)
IEEE 802.3x flow control (full duplex)
IEEE 802.1p, CoS
WRR, SP and FIFO queue schedule
Limiting the uplink/downlink rate based on each ONU
DBA and SLA

VLAN

Port-based VLAN
QinQ and flexible QinQ

Multicast

L2 multicast
IGMP Snooping
MLD Snooping

Layer-3 routing

Static routing, RIP, OSPF

Reliability

Unidirectional Link Detection (UDLD)
Hot swap of the GPON optical module
Optical path protection of GPON (type B/C, hand-in-hand)
Abnormal luminescence ONU detection such as long luminescence

Network Security

Limiting the maximum number of users on each port
Port isolation
Packet storm control
Flow-based ACL access control function
Transmission data encryption on the PON interface

Configuration Management

Various management modes such as CLI, SNMP and telnet
Conducting software upgrade through TFTP/FTP
Debug output

Dimensions (W×D×H)

442.5 x 304 x 44mm

Weight

5.25 kg

Environment

Operating environment: 0C-45C; 10%-85% non-condensation
Storage environment: -40℃-80℃; 5%-95% non-condensation

Power supply

Input voltage: AC90~240V, DC 36 ~ 72V
dual-power input, DC/AC power supply and hot-swap

Naujienos

Dalyvaujame ANGA COM 2026 parodoje!

Dalyvaujame ANGA COM 2026 parodoje!

Dalyvaujame ANGA COM 2026 parodoje!

Džiaugiamės galėdami pranešti, kad ELPA REFURB dalyvaus ANGA COM 2026 parodoje, kuri vyks 2026 m. gegužės 19–21 d. Kelne, Vokietijoje.

Kviečiame apsilankyti mūsų stende 7 salėje, kur pristatysime naujausius įrenginių gyvavimo ciklo valdymo ir atnaujinimo (refurbishment) sprendimus telekomunikacijų operatoriams bei B2B partneriams visoje Europoje.

Lauksime susitikimų su industrijos profesionalais, partneriais ir naujais bendradarbiais.

Iki pasimatymo 7 salėje, 2026 m. gegužės 19–21 d.!

www.elparefurb.com