BDCOM P3310

BDCOM P3310

Code

510900

GEPON Optical Line Terminal (OLT). L2 managed switch (CLI, Telnet. SSH). 4xPON lines, 6xGigEthernet. 19"x1U. 230VAC power supply.

GEPON Optical Line Terminal (OLT).
L2 managed switch;
4 x PON lines, 6xGigEthernet;
19"x1U. 230VAC power supply.
Option of seconf power supply - ask before ordering

Attributes	P3310C
System Capacity	Maximum coupling ratio, 1:64 32G backplane bandwidth
Interface	6 GE ports (2 gigabit RJ45 ports, 2 combo ports, 2 gigabit optical ports) 4 fixed EPON ports
PON Interface	A 1Gbps transmission rate with downlink and uplink symmetry Average emitting power of the PON port: +2dbm ~ +7dbm Light reception sensitivity of the PON port: -30dBm Security: ONU authentication mechanism
Standard	IEEE802.3ah IEEE 802.1D, Spanning Tree IEEE 802.1Q, VLAN IEEE 802.1w, RSTP
QoS	Backpressure flow control (half duplex) IEEE 802.3x flow control (full duplex) IEEE 802.1p, CoS WR, SP and FIFO Limiting the uplink/downlink rate based on each ONU Supporting DBA and SLA
VLAN	Port-based VLAN IEEE802.1Q VLAN relay
Multicast	IGMP v1/v2 IGMP Snooping
Reliability	Unidirectional Link Detection (UDLD) Hot swap of the EPON optical module on the expanded slot Optical path protection of EPON
Network Security	Limiting the maximum number of users on each port Port isolation Packet storm control Flow-based ACL access control function Transmission data encryption on the PON interface
Configuration Management	Various management modes such as CLI, Web, SNMP and TELNET Conducting software upgrade through TFTP and FTP Command prompt in English or in Chinese Debug output
Physical Characteristics	Dimensions mm (W×D×H) : 442 x315 x 44
	Installation: standard 19-inch cabinet
	Weight: 2kg
Environment Requirements	Working condition: 0℃-55℃; 10%-85% non-condensing
Environment Requirements	Storage condition: -40℃-80℃; 5%-95% non-condensing
Power Supply	Input voltage: AC100-240V Input frequency: 47-63Hz Support dual power supply Input current: 1A/230V Power consumption: Up to 48W

Come visit us in Hall 7, where we’ll showcase our latest device lifecycle and refurbishment solutions for telecom operators and B2B partners across Europe.

We look forward to meeting industry professionals, partners, and new collaborators.

See you in Hall 7 from 19–21 May 2026!

www.elparefurb.com

Klaipeda	Vilnius	Kaunas
Birutės str. 2 Tel. +370 614 45302 elpa@elpa.lt projektai_elpa I–V: 8:30–17:30 V: 8:30–16:30	Smolensko str. 10B-A5 Mobile: +370 687 54446 Email: dovydas.remeikis@elpa.lt I–V: 8:30–17:30 V: 8:30–16:30	Savanorių str. 225 Tel. +370 616 83395 kaunas@elpa.lt kaunas1_elpa I–V: 8:30–17:30 V: 8:30–16:30

Klaipeda

Vilnius

Kaunas

Birutės str. 2

Tel. +370 614 45302
elpa@elpa.lt
projektai_elpa

I–V: 8:30–17:30
V: 8:30–16:30

Smolensko str. 10B-A5

Mobile: +370 687 54446
Email: dovydas.remeikis@elpa.lt

I–V: 8:30–17:30
V: 8:30–16:30

Savanorių str. 225

Tel. +370 616 83395
kaunas@elpa.lt
kaunas1_elpa

I–V: 8:30–17:30
V: 8:30–16:30